Refrigerator air filter installation method
2021-06-05
First, you need to determine the type of air filter in a full-size refrigerator so that you can install the air filter accurately.

Some retailers offer air filters, including morefilter.com.

Type 1
Note: The air filter is located behind the blue LED light vent cover, on the back wall near the middle of the refrigerator.

1. Remove the air filter from the packaging.
2. Pull out the plastic cover on the vent cover. We recommend lifting one side of the cover first, and then lifting the other side to remove the cover.
3. Snap the filter into place.

Type 2
Install the air filter behind the ventilation door, on the rear wall near the top of the refrigerator compartment.

1. Remove the air filter from the packaging.
2. Lift and open the ventilation door.
3. Snap the filter into place.

This is a high-quality and economical air filter.

AIR1 / W10311524 FreshFlow Compatible Whirlpool Refrigerator Air Filter By FS, 6 pieces

The refrigerator air filter is used in combination with activated carbon to freshen the air in the refrigerator and help effectively remove unpleasant odors, including onions, garlic and durian. The filter adopts advanced technology to ensure that the humidity in the refrigerator is controlled to prevent the growth of bacteria and leave a fresh smell. The service life is 6 months, the brand compatibility is strong (Whirlpool, Kitchen Aid, Maytag, Amana, Jenn Air), and the installation is convenient. According to the above description, it only takes a few minutes or even less than a minute to complete the installation.

If you are still worrying about choosing a good refrigerator air filter, Morefilter products will be your wise choice. Please refer to the product description for specific compatible models.